/5.jpg)
Thiết bị Wifi 6E Access Point Aruba AP-615 ( R7J49A)
· [Đầy đủ CO + CQ]
· [Bảo Hành: Lifetime]
· [Kho hàng: Stock sẵn]
· [Liên hệ HOTLINE để có giá tốt nhất]
| Product category : | HPE | Access point - HPE | |
| Brand : | HPE |
| Warranty Time : | Lifetime |
Giới Thiệu Thiết bị Wifi Access Point Aruba AP-615 (R7J49A) – Aruba 630 series 802.11ax wi-fi 6E Campus Access Point
Dành cho các doanh nghiệp cần nhiều dung lượng không dây hơn và rộng hơn kênh, Aruba 610 Series APs Campus được thiết kế để sử dụng lợi thế của băng tần 6 GHz thông qua ba băng tần chuyên dụng. Qua sử dụng băng tần 6 GHz, dung lượng tăng hơn gấp đôi – vì vậy bạn có thể đáp ứng nhu cầu ngày càng tăng do thiếu băng thông vì ngày càng nhiều thiết bị khách và thiết bị IoT và tăng trưởng của cloud. Duy nhất đối với Aruba, Series 610 bao gồm siêu ba băng tần và cổng ethernet kép 2,5 Gbps để loại bỏ khoảng cách về phạm vi phủ sóng, cung cấp độ an toàn cao hơn và cung cấp kết nối nhanh chóng.
Thông Tin Thiết bị Wifi Access Point Aruba AP-615 (R7J49A)
| R7J49A Aruba AP 615 Datasheet | |
| Technical Specifications | |
| AP type | Indoor, tri-radio, 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2×2 MIMO |
| 2.4GHz radio | Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20) |
| 5GHz radio | Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices |
| 6GHz radio | Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices |
| Maximum number of associated client devices | Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio) |
| Maximum number of BSSIDs | 16 BSSIDs per radio |
| Supported frequency bands | – 2.400 to 2.4835GHz ISM
– 5.150 to 5.250GHz U-NII-1 – 5.250 to 5.350GHz U-NII-2A – 5.470 to 5.725GHz U-NII-2C – 5.725 to 5.850GHz U-NII-3/ISM – 5.850 to 5.895GHz U-NII-4 – 5.925 to 6.425GHz U-NII-5 – 6.425 to 6.525GHz U-NII-6 – 6.525 to 6.875GHz U-NII-7 – 6.875 to 7.125GHz U-NII-8 |
| Available bands and channels | Dependent on configured regulatory domain (country) |
| Supported radio technologies | – 802.11b: Direct-sequence spread-spectrum (DSSS)
– 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) – 8022.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units |
| Supported modulation types | – 802.11b: BPSK, QPSK, CCK
– 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256- QAM (proprietary extension) – 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension) – 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM |
| 802.11n high-throughput (HT) support | HT20/40 |
| 802.11ac very high throughput (VHT) support | VHT20/40/80 |
| 802.11ax high efficiency (HE) support | HE20/40/80/160 |
| Supported data rates (Mbps) | – 802.11b: 1, 2, 5.5, 11- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
– 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension) – 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension) – 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) – 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80) – 802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160) |
| 802.11n/ac packet aggregation | A-MPDU, A-MSDU |
| Transmit power | Configurable in increments of 0.5 dBm |
| Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements) | Per radio/band (2.4GHz / 5GHz / 6GHz): +21 dBm (18dBm per chain) |
| Wi-Fi Antennas | |
| Antena | Integrated downtilt omni-directional antennas for 2×2 MIMO with peak antenna gain of 2.8dBi in 2.4GHz, 4.5dBi in 5GHz and 4.5dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees.
– Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.0dBi in 2.4GHz, 3.5dBi in 5GHz and 3.4dBi in 6GHz. |
| Interfaces | E0: Ethernet wired network ports (RJ-45) Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
– 2.5Gbps speed complies with NBase-T and 802.3bz specifications – POE-PD: 48Vdc (nominal) 802.3af/at POE (class 3 or higher) – 802.3az Energy Efficient Ethernet (EEE) DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length USB 2.0 host interface (Type A connector): Capable of sourcing up to 1A / 5W to an attached device Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio – BLE: up to 5dBm transmit power (class 1) and -100dBm receive sensitivity (125kbps) – Zigbee: up to 5dBm transmit power and -97dBm receive sensitivity (250kbps) – Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.6dBi GNSS L1 (1575.42MHz) receiver supporting GPS, Galileo, GLONASS and BeiDou signals -Receive sensitivity: -162dBm (tracking) – Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.3dBi Advanced IOT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4GHz band Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status Reset button: factory reset, LED mode control (normal/off) Serial console interface (proprietary, micro-B USB physical jack) Kensington security slot Automatic thermal shutdown and recovery function |
| Mechanical Specifications | |
| Dimensions/weight (AP-615; unit without mount bracket) | – 160mm (W) x 160mm (D) x 39mm (H)
– 520g |
| Dimensions/weight (AP-615; shipping) | – 212mm (W) x 194mm (D) x 66mm (H)
– 800g |
| Environmental Specifications | |
| Operating conditions | – Temperature: 0C to +50C / +32F to +122F- Relative humidity: 5% to 95%
– ETS 300 019 class 3.2 environments – AP is plenum rated for use in air-handling spaces |
| Storage conditions | – Temperature: -25C to +55C / +13F to +131F- Relative humidity: 10% to 100%
– ETS 300 019 class 1.2 environments |
| Transportation conditions | – Temperature: -40C to +70C / -40F to +158F- Relative humidity: up to 95%
– ETS 300 019 class 2.3 environments |
| Reliability | |
| Mean Time Between Failure (MTBF) | 540khrs (62yrs) at +25C operating temperature |